Just a quickie to let you know about a few new products.
I have added a couple more capacitors/kits – 0.0047uF capacitors for the Eldred “cocked wah” mod and a Greasebucket single tone circuit kit.
Also now available are reducer bushes for 1/4inch /6.35mm posts. The same spec as our very popular 10mm reducer they have been made to give the best vintage look on headstocks with modern 3/8″ / 10mm hole – the lip is 11mm so you keep the small vintage footprint. They are a direct drop in for our Mighty Mite necks and modern spec Fender necks with 3/8″ / 10mm tuner holes. As always, be careful when fitting and carefully ream/sand/enlarge the holes if too tight.
Don’t use these with “import” spec 6mm posts as there will be a little too much slop – use our original versions, available with more options.
Hopefully some more product news will be on the way later this week!
Recent Comments