New Addition to Clearance Corner

Don’t forget to keep checking Clearance Corner.
I received a few of the MM2934VT (vintage tint CBS headstock Strat neck with rosewood fingerboard) with oversized tuner holes (approx 11mm)
If your tuners are screwed in at the back of the headstock it shouldn’t be a problem as they will be held firmly in place by the screws and the bush on the front. Vintage style tuners or pin located tuners will require adapter bushes and/or sleeves to make a snug fit. This is an easy fix using a pair of scissors and a drinks can, as seen here.

Share

Leave a Reply

Your email address will not be published. Required fields are marked *